Has anyone successfully integrated an Andover 256 panel? And if so how many devices were you able to discover with readable data?
The one Andover Network we were able to discover 125 devices the first 16 devices read fine but the 17th device we are able to read about 50% of the points discovered and from 18 on, we cannot read the discovered points (About 22 objects per device) on the rest though 1 or 2 objects will read.
there is a fault reading “QueueFullException”
I adjusted the max queue size from 256 to 1200 then 2400 but no change.
I adjusted the polling rate with no good results. Any thoughts
The one Andover Network we were able to discover 125 devices the first 16 devices read fine but the 17th device we are able to read about 50% of the points discovered and from 18 on, we cannot read the discovered points (About 22 objects per device) on the rest though 1 or 2 objects will read.
there is a fault reading “QueueFullException”
I adjusted the max queue size from 256 to 1200 then 2400 but no change.
I adjusted the polling rate with no good results. Any thoughts
No comments:
Post a Comment