We recently had a Bryant Evolution heat pump system installed, but noticed a couple of issues right away. I was hoping the experts on this forum could help clarify if the system was installed correctly.
Issue 1: Dampers - Are they Evolution compatible?
I wonder if the contractor installed the correct Evolution compatible modulating Dampers. For example, Zone 1 damper Model number is DAMPACT45DEG-B HF21KJ005. Is this damper Evolution compatible? I read somewhere that the correct model number is DAMPRND
There is very little variation in airflow. When in heating mode, there seems to be a lot of pressure on one of the ducts resulting in quite a lot of noise. I would have expected the systems to automatically adjust the airflow to a more reasonable level
Issue 2: Vibration in Heat Mode
There appears to be a lot of vibration coming from the outside unit in heat mode. The vibration appears to be transferred to the house wall via the line set, making a section of the outside wall vibrate and transferring noise inside of the house where the lineset comes into the wall. Is this normal with Evolution systems?
Here is the list of the equipment I have:
- Heat Pump: 288BNV048-A
- Fan Coil: FE4ANF005
- Damper Control Module: SYSTXBB4ZC01
- Connex Control: SYSTBBECC01-A
- Dampers: DAMPACT45DEG-B HF21KJ005
See Photos attached
Many Thanks for your help!
W
Issue 1: Dampers - Are they Evolution compatible?
I wonder if the contractor installed the correct Evolution compatible modulating Dampers. For example, Zone 1 damper Model number is DAMPACT45DEG-B HF21KJ005. Is this damper Evolution compatible? I read somewhere that the correct model number is DAMPRND
There is very little variation in airflow. When in heating mode, there seems to be a lot of pressure on one of the ducts resulting in quite a lot of noise. I would have expected the systems to automatically adjust the airflow to a more reasonable level
Issue 2: Vibration in Heat Mode
There appears to be a lot of vibration coming from the outside unit in heat mode. The vibration appears to be transferred to the house wall via the line set, making a section of the outside wall vibrate and transferring noise inside of the house where the lineset comes into the wall. Is this normal with Evolution systems?
Here is the list of the equipment I have:
- Heat Pump: 288BNV048-A
- Fan Coil: FE4ANF005
- Damper Control Module: SYSTXBB4ZC01
- Connex Control: SYSTBBECC01-A
- Dampers: DAMPACT45DEG-B HF21KJ005
See Photos attached
Many Thanks for your help!
W
No comments:
Post a Comment